Polyamide 12 for electrostatic coating and liquid coating system.
VESTOSINT 2161 natural color is a PA 12, especially developed for electrostatic coating of metal parts, e.g., coating of components in the automotive industry.
VESTOSINT 2161 is also developed for the use in liquid coating systems. It is used as an additive, for instance, in coil coating systems, to improve abrasion resistance and T-bend test.
| Original Document | Technical Datasheet(English) | |||
| Appearance | PowderNatural Color | |||
| Processing | Coating | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ISO 1183 | |
Water Absorption | *** % | ISO 62 | 100 °C, immersion |
Moisture /Humidity Absorption | *** % | ISO 62 | 23 °C, 50 % r. h. |
Moisture /Humidity Absorption | *** % | ISO 62 | 23 °C, 96 % r. h. |
Abrasion resistance | *** mg/100cycles | ASTM D 1242 | CS17, 500g |
Particle Size | *** micrometer | ISO 4610 | Average particlesize, d50 |
Bulk(Apparent ) Density | *** g/cm³ | ISO 60 | |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Strength | |||
Yield | *** Mpa | ISO 527-1/-2 | |
Tensile Elongation | |||
Yield | *** % | ISO 527-1/-2 | |
Break | *** % | ISO 527-1/-2 | |
| Hardness | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Shore D hardness | *** D | ISO 868 | |
Ball Indentation Hardness | *** Mpa | ISO 2039-1 | H30 |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Specific Heat | *** J/kg-K | - | |
Coefficient of Linear Thermal Expansion | |||
- | *** E-6/K | ISO 11359 | 23 – 55 °C |
Melt Temperature(Tm) | *** °C | ISO 3146 | |
Thermal Conductivity | ***~*** W/(m K) | DIN 52612-1 | |
| Electrical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Volume Resistivity | *** Ohm-m | IEC 60093 | |
Dielectric Strength | *** kV/mm | IEC 60243-1 | K20/P50 |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
