Polyamide 12 fluidized bed coating powder
VESTOSINT 1301 white is a fluidized bed coating powder based on polyamide 12. It is most suitable for the coating of thin-walled parts.
| Original Document | Technical Datasheet(English) | |||
| Appearance | PowderWhite | |||
| Processing | Coating | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ISO 1183 | |
Water Absorption | *** % | ISO 62 | 100 °C, immersion |
Moisture /Humidity Absorption | *** % | ISO 62 | 23 °C, 50 % r. h. |
Moisture /Humidity Absorption | *** % | ISO 62 | 23 °C, 96 % r. h. |
Abrasion resistance | *** mg/100cycles | ASTM D 1242 | CS17, 500g |
Particle Size | *** micrometer | ISO 4610 | ≤ 100 % Weight |
Particle Size | *** micrometer | ISO 4610 | ≤ 2 % Weight |
Particle Size | *** micrometer | ISO 4610 | ≤ 45 % Weight |
Bulk(Apparent ) Density | *** g/cm³ | ISO 60 | |
| Hardness | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Shore D hardness | *** D | ISO 868 | |
Ball Indentation Hardness | *** Mpa | ISO 2039-1 | H30 |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Specific Heat | *** J/kg-K | - | |
Coefficient of Linear Thermal Expansion | |||
- | *** E-6/K | ISO 11359 | 23 – 55 °C |
Melt Temperature(Tm) | *** °C | ISO 3146 | |
Thermal Conductivity | ***~*** W/(m K) | DIN 52612-1 | |
| Electrical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Volume Resistivity | *** Ohm-m | IEC 60093 | |
Dielectric Strength | *** kV/mm | IEC 60243-1 | K20/P50 |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
