High viscosity, platicized, impact-modified, heat and light stabilized PA12 compound for extrusion.
VESTAMID®NRG 1001 is a plasticized PA 12 compound with heat and light stabilizers for the extrusion of flexible tubing and hoses especially for oil and petrochemical applications.
VESTAMID®NRG 1001 is characterized by easy processing and good dimensional control during pipe extrusion, especially when processing large pipe diameters.
Properties of compounds based on polyamide 12 vary little with changing humidity due to low moisture absorption
Parts made of the described semi-crystalline materialare characterized by exceptional impact strength, low coefficient of sliding friction and good chemical resistance.
| Original Document | Technical Datasheet(English) | |||
| Features | High ImpactHeat StabilizedLow Friction/WearDimensional StabilityEasy processingUV StabiltiyChemical ResistanceHigh Viscosity | |||
| Additive | UV-StabilizerImpact ModifierHeat StabilizerPlasticizer | |||
| Appearance | Pellets/GranulesNatural Color | |||
| Processing | ExtrusionTube Extrusion | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ISO 1183 | 23°C |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Modulus | *** Mpa | ISO 527-1/-2 | |
Tensile Strength | |||
Yield | *** Mpa | ISO 527 | pipe test specimens |
Break | *** Mpa | ISO 527-1/-2 | |
Tensile Elongation | |||
Yield | *** % | ISO 527 | pipe test specimens |
Break | *** % | ISO 527 | pipe test specimens |
Break | *** % | ISO 527-1/-2 | |
| Impact | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Charpy Notched Impact Strengh | |||
-30℃ (-22℉) | *** kJ/m² | ISO 179/1eA | Complete break |
23℃ (73℉) | *** kJ/m² | ISO 179/1eA | Partial break |
Charpy Unnotched Impact Strengh | |||
-30℃ (-22℉) | *** kJ/m² | ISO 179/1eU | |
23℃ (73℉) | *** kJ/m² | ISO 179/1eU | |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Melt Temperature(Tm) | *** °C | ISO 11357 | DSC, 2nd heating |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
