Polyimid P84® NT - at a glance
Excellent performance at high temperatures
High strength and excellent shape stability
Very good impact resistance
High heat deflection temperature
Very good creep resistance even at elevated temperatures
Machinable with standard tools
Low wear and friction behaviour
Processing by Hot compression molding or Direct forming
Application examples
bushings, seals, bearings components, guides, gear wheels, and valve parts
in the automotive and aerospace industries and in industrial equipment.
Special Characteristics
Heat stabilized or stable to heat
Additives
Lubricants
Delivery form
Pellets, Granules, Powder
| Original Document | Technical Datasheet(English) P84® NT | |||
| Features | High StrengthHigh ImpactHeat ResistanceHeat StabilizedWear/Abrasion ResistanceLow Friction/WearCreep ResistantFilled & Reinforced | |||
| Additive | Heat StabilizerLubricant | |||
| Appearance | Pellets/GranulesPowder | |||
| Processing | Compression Moulding | |||
| Reinforced | 40% Graphite | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ISO 1183 | dry |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Modulus | *** Mpa | ISO 527 | dry |
Tensile Strength | |||
Break | *** Mpa | ISO 527 | dry |
Tensile Elongation | |||
Break | *** % | ISO 527 | dry |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Heat Deflection Temperature(HDT) | |||
0.45 Mpa (66 psi)（4.6kg/cm²） | *** °C | ISO 75-1/-2 | dry |
1.8 Mpa (264 psi)（18.6kg/cm²） | *** °C | ISO 75-1/-2 | dry |
Coefficient of Linear Thermal Expansion | |||
Flow | *** E-6/K | ISO 11359-1/-2 | 23°C to 55 °C, parallel |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
