ACRYLITE® Hi-Gloss FT-8 polymer is an amorphous thermoplastic molding and extrusion compound based on polymethyl methacrylate (PMMA). ACRYLITE® Hi-Gloss FT-8 polymer is available in a range of opaque colors including deep jet black.
Typical properties of ACRYLITE® Hi-Gloss acrylic polymers are:
excellent weather resistance
high mechanical strength
high surface hardness and mar resistance
good melt flow rate
versatile colorability due to crystal clarity
The special properties of ACRYLITE® Hi-Gloss FT-8 polymer are:
high heat resistance
high melt strength
available in a range of opaque colors
Application:
Used for injection molding of automotive parts.
| Original Document | Technical Datasheet(English) | |||
| Features | Heat ResistanceAnti-ScratchWeather ResistanceHigh FlowHigh melt strength | |||
| Appearance | Pellets/GranulesClear/TransparentOpaque ColorBlack | |||
| Processing | InjectionExtrusion | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ISO 1183 | |
Melt Volume Flow Rate(MVR) | |||
230℃/3.8 kg | *** cm³/10 min | ISO 1133 | |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Modulus | *** Mpa | ISO 527 | 1 mm/min |
Tensile Strength | |||
Break | *** Mpa | ISO 527 | 5 mm/min |
Tensile Elongation | |||
Break | *** % | ISO 527 | 5 mm/min |
| Impact | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Charpy Unnotched Impact Strengh | |||
23℃ (73℉) | *** kJ/m² | ISO 179/1eU | |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Heat Deflection Temperature(HDT) | |||
0.45 Mpa (66 psi)（4.6kg/cm²） | *** °C | ISO 75 | |
1.8 Mpa (264 psi)（18.6kg/cm²） | *** °C | ISO 75 | |
Vicat Softening Temperature(VST) | *** °C | ISO 306 | B / 50 |
Coefficient of Linear Thermal Expansion | |||
- | *** E-6/K | ISO 11359 | 0 - 50°C |
Glass Transition Temperature | *** °C | IEC 10006 |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
