Processing
Extrusion - cast film, Blown Film Extrusion, Other Extrusion
Delivery form
Granules
Special Characteristics
Transparent
Regional Availability
North America, Europe, Asia Pacific, South and Central America, Near East/Africa
Product Attributes
Barrier Properties, High viscosity, Nucleated
Packaging
Non oriented film, Oriented film, Paper coating, Tubes
Food Contact
EU Requirements, FDA
| Original Document | Technical Datasheet(English) Technical Datasheet(Chinese) | |||
| Features | Food ContactHigh ViscosityHigh Barrier property/Low permeation | |||
| Additive | Nucleating Agent | |||
| Appearance | Pellets/GranulesClear/Transparent | |||
| Processing | ExtrusionFilm Extrusion | |||
| Compliance | EU 2011/10/ECFDA | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ISO 1183 | dry |
Melt Volume Flow Rate(MVR) | |||
275°C/5 kg | *** cm³/10 min | ISO 1133 | dry |
Water Absorption | *** % | ISO 62 | dry |
Moisture /Humidity Absorption | *** % | ISO 62 | dry |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Modulus | *** Mpa | ISO 527-1/-2 | cond. |
Tensile Modulus | *** Mpa | ISO 527-1/-2 | dry |
Tensile Strength | |||
Break | *** Mpa | ISO 527-1/-2 | cond. |
Tensile Elongation | |||
Yield | *** % | ISO 527-1/-2 | cond. |
Nominal Tensile Strain at Break | *** % | ISO 527-1/-2 | cond. |
Coefficient of Friction | *** - | ISO 8295 | dry, Film |
| Impact | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Charpy Notched Impact Strengh | |||
-30℃ (-22℉) | *** kJ/m² | ISO 179/1eA | cond. |
23℃ (73℉) | *** kJ/m² | ISO 179/1eA | cond. |
Charpy Unnotched Impact Strengh | |||
-30℃ (-22℉) | *** kJ/m² | ISO 179/1eU | cond. |
23℃ (73℉) | *** kJ/m² | ISO 179/1eU | cond. |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Melt Temperature(Tm) | *** °C | ISO 11357-1/-3 | dry |
| Optical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Gloss | *** - | ISO 2813 | dry, 60° |
| Film | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Strength | |||
Yield | *** Mpa | ISO 527-3 | dry, normal |
Yield | *** Mpa | ISO 527-3 | dry, parallel |
Tensile Elongation | |||
Yield | *** % | ISO 527-3 | dry, normal |
Yield | *** % | ISO 527-3 | dry, parallel |
Break | *** % | ISO 527-3 | dry, normal |
Break | *** % | ISO 527-3 | dry, parallel |
Elmondorf Tear | *** N | ISO 6383-2 | dry, normal |
Elmondorf Tear | *** N | ISO 6383-2 | dry, parallel |
Trouser Tear | *** kN/m | ISO 6383-1 | dry, normal |
Trouser Tear | *** kN/m | ISO 6383-1 | dry, parallel |
Water Vapor Transmission Rate | *** g/m²/24 hr | ISO 15106-1/-2 | dry, 23°C/85%r.h. |
Oxygen permeability | *** cm³/m²/bar/24 hr | DIS 15105-1/-2 | dry, 23°C/0%r.h. |
Oxygen permeability | *** cm³/m²/bar/24 hr | DIS 15105-1/-2 | dry, 23°C/85%r.h. |
Carbon Dioxide transm. rate | *** cm³/m²/bar/24 hr | ISO 15105-1/-2 | dry, 23°C/0%r.h. |
Carbon Dioxide transm. rate | *** cm³/m²/bar/24 hr | ISO 15105-1/-2 | dry, 23°C/85%r.h. |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
