Processing
Injection Molding, Other Extrusion
Delivery form
Granules
Special Characteristics
High impact or impact modified, Improved UV resistance (outdoor use), Improved heat resistance
Regional Availability
North America, Europe, Asia Pacific, South and Central America, Near East/Africa
Product Attributes
High viscosity, Hydrolysis resistant
Automotive
Air intake sytems, Compressed air systems, Cooling and climate control
Electricals & Electronics
Cables & Tubes
Industry & Consumer goods
Hydraulics & Pneumatics, Sports & Leisure
| Original Document | Technical Datasheet(English) Technical Datasheet(Chinese) | |||
| Features | High ImpactHeat ResistanceUV StabiltiyHydrolysis ResistanceHigh Viscosity | |||
| Additive | UV-StabilizerImpact ModifierHeat StabilizerHydrolysis Resistant | |||
| Appearance | Pellets/Granules | |||
| Processing | InjectionExtrusion | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ISO 1183 | dry |
Mold Shrinkage | |||
Flow | *** % | ISO 294-4, 2577 | dry |
Across Flow | *** % | ISO 294-4, 2577 | dry |
Water Absorption | *** % | ISO 62 | dry |
Moisture /Humidity Absorption | *** % | ISO 62 | dry |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Modulus | *** Mpa | ISO 527-1/-2 | cond. |
Tensile Modulus | *** Mpa | ISO 527-1/-2 | dry |
Tensile Strength | |||
Yield | *** Mpa | ISO 527-1/-2 | cond. |
Yield | *** Mpa | ISO 527-1/-2 | dry |
Break | *** Mpa | ISO 527-1/-2 | cond. |
Break | *** Mpa | ISO 527-1/-2 | dry |
Tensile Elongation | |||
Yield | *** % | ISO 527-1/-2 | cond. |
Yield | *** % | ISO 527-1/-2 | dry |
Nominal Tensile Strain at Break | *** % | ISO 527-1/-2 | cond. |
Nominal Tensile Strain at Break | *** % | ISO 527-1/-2 | dry |
| Impact | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Charpy Notched Impact Strengh | |||
-30℃ (-22℉) | *** kJ/m² | ISO 179/1eA | cond. |
-30℃ (-22℉) | *** kJ/m² | ISO 179/1eA | dry |
23℃ (73℉) | *** kJ/m² | ISO 179/1eA | cond. |
23℃ (73℉) | *** kJ/m² | ISO 179/1eA | dry |
Charpy Unnotched Impact Strengh | |||
-30℃ (-22℉) | *** kJ/m² | ISO 179/1eU | cond. |
-30℃ (-22℉) | *** kJ/m² | ISO 179/1eU | dry |
23℃ (73℉) | *** kJ/m² | ISO 179/1eU | cond. |
23℃ (73℉) | *** kJ/m² | ISO 179/1eU | dry |
| Hardness | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Shore D hardness | *** D | ISO 868 | cond., 15s |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Heat Deflection Temperature(HDT) | |||
0.45 Mpa (66 psi)（4.6kg/cm²） | *** °C | ISO 75-1/-2 | dry |
1.8 Mpa (264 psi)（18.6kg/cm²） | *** °C | ISO 75-1/-2 | dry |
Coefficient of Linear Thermal Expansion | |||
Flow | *** E-6/K | ISO 11359-1/-2 | dry |
Across Flow | *** E-6/K | ISO 11359-1/-2 | dry |
Melt Temperature(Tm) | *** °C | ISO 11357-1/-3 | dry |
Continuous Use Temperature | |||
Long term | ***~*** °C | ISO 2578 | long term |
Temperature at Short Circle Operation | *** °C | Internal | short term |
| Flammability | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Flame Rating | |||
HB | *** mm | IEC 60695-11-10 | dry |
| Electrical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Volume Resistivity | *** Ohm-m | IEC 60093 | cond. |
Surface Resistivity | *** Ohm | IEC 60093 | cond. |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
