Antisqueak Blow Molding Grade
| Original Document | Technical Datasheet(English) | |||
| Processing | Blow Molding | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ISO 1183 | |
Melt Volume Flow Rate(MVR) | |||
230°C/10 kg | *** cm³/10min | ISO 1133 | |
Water Absorption | *** % | ISO 62 | |
Moisture /Humidity Absorption | *** % | ISO 62 | |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Modulus | *** Mpa | ISO 527-1/-2 | |
Tensile Strength | |||
Break | *** Mpa | ISO 527-1/-2 | |
Break | *** Mpa | ISO 527-1/-2 | die cutting, normal |
at 5% strain | *** Mpa | ISO 527-1/-2 | |
at 5% strain | *** Mpa | ISO 527-1/-2 | die cutting, normal |
at 10% strain | *** Mpa | ISO 527-1/-2 | |
at 10% strain | *** Mpa | ISO 527-1/-2 | die cutting, normal |
at 10% strain | *** Mpa | ISO 527-1/-2 | die cutting, parallel |
at 10% strain | *** Mpa | ISO 527-1/-2 | die cutting, parallel, +100°C |
at 50% strain | *** Mpa | ISO 527-1/-2 | |
at 50% strain | *** Mpa | ISO 527-1/-2 | die cutting, normal |
at 100% strain | *** Mpa | ISO 527-1/-2 | |
at 100% strain | *** Mpa | ISO 527-1/-2 | die cutting, normal |
Tensile Elongation | |||
Break | *** % | ISO 527-1/-2 | die cutting, normal |
Nominal Tensile Strain at Break | *** % | ISO 527-1/-2 | |
Tear Strength | *** kN/m | ISO 34 | |
Tear Strength | *** kN/m | ISO 34 | die cutting, normal, (without nick |
| Impact | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Charpy Notched Impact Strengh | |||
-30℃ (-22℉) | *** kJ/m² | ISO 179/1eA | |
23℃ (73℉) | *** kJ/m² | ISO 179/1eA | |
Izod Notched Impact Strengh | |||
-20℃ (-4℉) | *** kJ/m² | ISO 180/1A | |
23℃ (73℉) | *** kJ/m² | ISO 180/1A | |
| Hardness | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Shore D hardness | *** D | ISO 868 | 3s |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Melt Temperature(Tm) | *** °C | ISO 11357-1/-3 | 10°C/min |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
