Very High Viscosity, Lubricated, Nucleated, Film Extrusion, Food Contact Quality
| Original Document | Technical Datasheet(English) | |||
| Features | Food ContactHigh Viscosity | |||
| Additive | Lubricant | |||
| Processing | Film Extrusion | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ISO 1183 | |
Viscosity | *** cm³/g | ISO 307, 1157, 1628 | Viscosity number |
Viscosity | *** Pa-s | Internal | Melt Viscosity (260 °C) |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Coefficient of Friction | *** - | ISO 8295 | Dynamic coefficient of friction, 0.05mm Film |
Coefficient of Friction | *** - | ISO 8295 | Static coefficient of friction, 0.05mm Film |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Specific Heat | *** J/kg-K | - | Average spec. heat capacity 20-150 °C |
Specific Heat | *** J/kg-K | - | Spec. heat capacity |
Coefficient of Linear Thermal Expansion | |||
Flow | *** E-6/°C | ISO 11359-1/-2 | |
| Optical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Light Transmission | *** % | Internal | 0.05mm Film |
| Film | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Strength | |||
Yield | *** Mpa | ISO 527-3 | 0.05mm Film, parallel |
Break | *** Mpa | ISO 527-3 | 0.05mm Film, parallel |
Tensile Elongation | |||
Break | *** % | ISO 527-3 | 0.05mm Film, parallel |
Tensile Modulus | *** Mpa | Internal | 0.05mm Film |
Piercing strength | *** J/m | Internal | 0.05mm Film |
Trouser Tear | *** kN/m | ISO 6383-1 | 0.05mm Film |
Water Vapor Transmission Rate | *** g/m²/24 hr | DIS 15106-1/-3 | 0.05mm Film, at 23°C/85%r.h. |
Oxygen permeability | *** cm³/m²/bar/24 hr | DIS 15105-1/-2 | 0.05mm Film, at 23°C/0%r.h |
Oxygen permeability | *** cm³/m²/bar/24 hr | DIS 15105-1/-2 | 0.05mm Film, at 23°C/85%r.h |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
