| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Density/Specific Gravity |
*** kg/m³
| ISO 1183 | |
Density/Specific Gravity |
*** kg/m³
| ASTM D792 | |
Melt Mass Flow Rate(MFR) | | | |
300℃/1.2 kg |
*** g/10min | ASTM D1238 | |
Mold Shrinkage | | | |
- |
***~*** mm/mm | ASTM D955 | |
Water Absorption |
*** %
| ASTM D570 | 24 hrs, 23℃ |
Water Absorption |
*** %
| ASTM D570 | equilibrium, 50%RH, 23℃ |
Water Absorption |
*** %
| ISO 62 | 24 hrs, 23℃ |
Water Absorption |
*** %
| ISO 62 | equilibrium, 50%RH, 23℃ |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Modulus |
*** Mpa
| ASTM D638 | |
Tensile Modulus |
*** Mpa
| ISO 527-2 | |
Tensile Strength | | | |
Yield |
*** Mpa | ASTM D638 | |
Yield |
*** Mpa | ISO 527-2 | |
Break |
*** Mpa | ASTM D638 | |
Break |
*** Mpa | ISO 527-2 | |
Tensile Elongation | | | |
Yield |
*** % | ASTM D638 | |
Yield |
*** % | ISO 527-2 | |
Break |
*** % | ASTM D638 | |
Break |
*** % | ISO 527-2 | |
Flexural Modulus |
*** Mpa
| ASTM D790 | |
Flexural Modulus |
*** Mpa
| ISO 178 | |
Flexural Strength | | | |
- |
*** Mpa | ASTM D790 | |
- |
*** Mpa | ISO 178 | |
| Impact | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Izod Notched Impact Strengh | | | |
-30℃ (-22℉) |
*** J/m | ASTM D256 | |
-30℃ (-22℉) |
*** kJ/m² | ISO 180 | |
23℃ (73℉) |
*** J/m | ASTM D256 | |
23℃ (73℉) |
*** kJ/m² | ISO 180 | |
Izod Unnotched Impact Strengh | | | |
23℃ (73℉) |
*** J/m | ASTM D256 | |
23℃ (73℉) |
*** kJ/m² | ISO 180 | |
| Hardness | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Rockwell M |
*** M
| ASTM D 785 | |
Rockwell M |
*** M
| ASTM D 785 | |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Heat Deflection Temperature(HDT) | | | |
0.45 Mpa (66 psi)（4.6kg/cm²） |
*** °C | ASTM D648 | 3.2mm,Unannealed |
1.8 Mpa (264 psi)（18.6kg/cm²） |
*** °C | ASTM D648 | 3.2mm,Unannealed |
1.8 Mpa (264 psi)（18.6kg/cm²） |
*** °C | ASTM D648 | 3.2mm,annealed |
1.8 Mpa (264 psi)（18.6kg/cm²） |
*** °C | ISO 75-2 | Unannealed |
Vicat Softening Temperature(VST) |
*** °C
| ASTM D1525 | |
Vicat Softening Temperature(VST) |
*** °C
| ISO 306 | B120 |
Coefficient of Linear Thermal Expansion | | | |
- |
*** E-6 mm/mm/℃ | ASTM D 696 | -40 to 82℃ |
| Electrical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Volume Resistivity |
*** Ohm-cm
| ASTM D257 | |
| Optical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Light Transmission |
*** %
| ASTM D1003 | 3.0mm |
Light Transmission |
*** %
| ISO 13468-1 | 3.0mm |
Haze |
*** %
| ASTM D1003 | 3.0mm |
Haze |
*** %
| ISO/DIS 14782 | 3.0mm |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
