| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Density/Specific Gravity |
*** kg/m³
| ASTM D792 | |
Melt Mass Flow Rate(MFR) | | | |
300℃/1.2 kg |
*** g/10min | ASTM D1238 | |
Mold Shrinkage | | | |
- |
***~*** mm/mm | ASTM D955 | |
Water Absorption |
*** %
| ASTM D570 | 24 hrs, 23℃ |
Water Absorption |
*** %
| ASTM D570 | equilibrium, 50%RH, 23℃ |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Modulus |
*** Mpa
| ISO 527 | |
Tensile Strength | | | |
Yield |
*** Mpa | ISO 527 | 23℃,50 mm/min |
Break |
*** Mpa | ISO 527 | |
Tensile Elongation | | | |
Yield |
*** % | ISO 527 | |
Break |
*** % | ISO 527 | |
Flexural Modulus |
*** Mpa
| ISO 178 | |
Flexural Strength | | | |
- |
*** Mpa | ISO 178 | |
| Impact | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Charpy Notched Impact Strengh | | | |
23℃ (73℉) |
*** kJ/m² | ISO 179 | |
Izod Notched Impact Strengh | | | |
23℃ (73℉) |
*** J/m | ISO 180/A | |
Izod Unnotched Impact Strengh | | | |
23℃ (73℉) |
*** kJ/m² | ISO 180/1U | |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Heat Deflection Temperature(HDT) | | | |
0.45 Mpa (66 psi)（4.6kg/cm²） |
*** °C | ASTM D648 | 4 mm,annealed |
1.8 Mpa (264 psi)（18.6kg/cm²） |
*** °C | ASTM D648 | 4 mm,Unannealed |
1.8 Mpa (264 psi)（18.6kg/cm²） |
*** °C | ASTM D648 | 4 mm,annealed |
Vicat Softening Temperature(VST) |
*** °C
| ASTM D1525 | 50℃ /hr, 50N Load |
Coefficient of Linear Thermal Expansion | | | |
- |
*** E-6 mm/mm/℃ | ASTM D 696 | -40 to 82℃ |
| Optical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Light Transmission |
*** %
| ASTM D1003 | |
Haze |
***~*** %
| ASTM D1003 | |
Refractive Index |
*** -
| ASTM D542 | |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
